We may earn a commission if you make a purchase through one of our links. The LA Times newsroom or editorial staff was not involved in the creation of this content. Learn more

Strong and Sharp: Best Tile Saws

Cutting tile poses special challenges. Not only is this material extremely hard and abrasive which destroys normal saw blades easily, but it’s extremely brittle giving it a tendency to break and chip in unwanted ways. Because of this, special saws are required with special blades designed just for cutting tile.

Typically, diamond blades are used to cut tile which consist of diamond dust glued to a metal saw blade. There are also some abrasive blades used for cutting tile but they’re usually used when cutting tile with saws other than actual tile saws.

While most tile saws are stationary, there are some manufacturers who also provide handheld saws but these are mostly used for touchup work rather than cutting full tiles. They’re not as maneuverable as regular handheld saws such as circular saws, due to the need for a water bottle to cool the blade.

Before looking at the best tile saws in 2021 we've selected, we recommend taking a moment to look at our tile saw buyer's guide below which will help you choose from the variety of models available.

What is the best tile saw of 2021?

PORTER-CABLE 20V MAX Wet Tile Saw

Lackmond is a company known for building stone, concrete, pavement and tile cutting equipment and diamond blades. This saw comes with one of their famous diamond blades. The powerful 15 amp motor produces 2.4 HP at 4,200 RPM. It has a 24-inch rip capacity and 18-inch diagonal rip capacity with a 3-3/4-inch depth of cut. The motor is tilting, offering 22.5 and 45 degree bevel cutting.

The saw is unique in that it has both a LED work light to make it easier to see your work. There’s also a laser cutting light for accurate cuts. This saw is mounted to a heavy-duty, collapsible stand with wheels.

QEP 22750Q 3/4 HP Wet Tile Saw

No, this isn’t the saw to drag out in the middle of your bridge game, nor is it designed for cutting up your local bridge over troubled waters. This model is called a bridge saw, because like the MK Diamond unit the saw travels on a “bridge” or rails, over the material to be cut.

The manufacturer’s web site doesn’t list the motor’s horsepower, but only mentions that it is 10.5 amps. I’d take that to mean that it’s about 1-1/4 HP. The rails allow cutting of up to 30-inches, which means you can diagonal cut a tile up to 22-inch square. This one also has plunge cut capability while the rail pivots for 45 and 90 degree cuts.

MK-370EXP 1-1/4 HP 7-Inch Wet Cutting Tile Saw

MK Diamond is largely accepted as the crème de la crème of tile saws. They produce more models and sell more saws than everyone else put together. MK Diamond makes a variety of tile saw models, including this 24-inch model. It comes with a 1.5 HP Baldor motor, with permanently lubricated shaft bearings.

Although there’s a 10-inch wet cut diamond blade included, this tile saw also accommodates 6-inch and 8-inch profile wheels. The multi-position motor post and cutting head allow for plunge cuts and the smaller sized wheels while a blade shaft lock makes changing blades fast and easy. This saw has been a favorite of rental companies due to its tough construction and long life. Lastly, this model comes with a stand.

SKIL 3540-02 7-Inch Wet Tile Saw

Bosch’s tile saw comes equipped with a 1.4 HP motor, turning at 4,200 RPM. It has a 24-inch capacity, or 18 inches on the diagonal. The expanded rear and side water collection trays help prevent over-spray and optimize water retention. The table is rubberized for secure positioning of the tile, without moving and has sealed bearings for longer life. This one also has plunge capacity,  a spindle lock for easier blade changes, and now comes with a stand as well.

DeWalt D24000S, Heavy-Duty 10" Wet Tile Saw

Moving to a manufacturer that most all contractors will know, we have DeWalts entry into the wet tile saw market. This 1-1/2 HP unit drives a 10-inch blade. The 24-inch ripping capacity will allow you to cut 18-inch tiles on the diagonal. DeWalt has put dual water nozzles on this unit, which strikes me as a pretty good idea. It handles plunge cuts and the miter settings are indexed for 45 degrees and 22.5 degrees, the only one that has that 22.5 degree setting.

Delta 96-107 7" Cruzer Wet Tile Saw

The C.R. Lawrence saw is a modified Makita cordless circular saw. The major modification is the addition of a water bottle and feeding mechanism as well as a change of blade. There is probably also an additional seal, to prevent the water from getting into the drive mechanism or motor. Being a Makita, you can count on this saw to be quality and to last.

The incredibly small size means this saw can be used to make cuts in place, including plunge cuts, even in tight spaces. The motor turns at 1,400 RPM and the shoe tilts up to 45 degrees. The Li-Ion battery pack provides long-service life, along with fast recharge times. This same saw is also sold for cutting glass.

DEWALT D24000S Wet Tile Saw with Stand

DeWalt’s saw is a more traditional circular saw design, with the addition of a water line. The water line is attached to a sink faucet or garden hose for a continuous water supply. An on-the-saw valve allows you to turn off the water when not in use.

The saw’s motor turns the 4-3/8” diamond blade at 13,000 RPM for faster cutting. A lock-on button makes it so you don’t have to maintain the trigger pressed, reducing operator error. This saw not only cuts through tile, but granite, porcelain, concrete and stone as well. The shoe bevels up to 45 degrees for angled cuts, as well as allowing the depth of cut to be set.

M-D Building Products 49046 4-Inch Marble/Tile Saw

Hitachi weighs in with a saw that they're referring to as a masonry saw. Tile qualifies as masonry, but they’re making a statement that this saw can be used for more than just tile. It has an 11.6 amp motor, which produces a no-load speed of 11,500 RPM for great cutting efficiency.

This saw has a very short blade to base edge distance, for cuts in tight areas, and a one touch lever or adjusting the depth of cut. The armature coil and ball bearing motor bearings are sealed to keep dust out and help ensure long life. Low vibration and an elastomeric covered handle help with operator comfort.

MK Diamond 169612 New MK-101-24 1-1/2 HP 10-Inch Wet Cutting Tile Saw

MK Diamond, Produces a wide range of stationary tile saws, and this one handheld unit. This is the same style as the Skil tile saw and could possibly even have been made by them. The differences between the two are somewhat insignificant. The motor is a little smaller than the Skil unit, at 8.75 amps, compared to 11. However, this is a dry saw only, with no provision for adding a water feed, either from a bottle or from a hose. That will drastically reduce blade life.

QEP 22900Q Power 1 HP Pro Wet Tile Saw

QEP is one of the largest manufacturers of tile saws, with a broad product lineup. That made it very surprising to find that they have the least expensive handheld tile saw on the market. If you don't use one all the time, this is a great bargain. It comes with a 1-3/5 HP motor that draws 10 amps. Depth of cut and shoe bevel are easily adjustable and the motor is double insulated to prevent water damage. A rubber grip has been added for comfort and the on-off switch is a push button.

Buyer's Guide

Don't confuse a tile saw with a regular circular saw. A tile saw is specially designed for cutting a ceramic tile. It may look like a circular saw, but it is mounted on a sliding table and has a large water pan under it. The only similarity between a circular saw and a tile saw is that the latter has a head like the former.

Why do you need a Tile Saw?

The cutting blades of the best tile saw are the same as those used for concrete or stone, i.e., diamond blades. You can rapidly chip the material with the help of sharp blades. To ensure the rapid life of your tile saw, you can use a stream of water to keep it cool constantly. Water can also prevent the blades from dust and ensure that the blades remain sharp and effective. A regular circular saw does not come with these functionalities. Take a look at some more of its benefits:

Money-Saving

The foremost reason for using a tile saw is that it can save you a lot of money. If you have some small projects to finish at home, try to do them yourselves instead of calling a contractor. Contractors have astonishingly high fees, and you will also be charges percentage rates on all your tiles. If you further want to shape your tiles, then you will have to give some extra bucks. Invest once in a tile saw and save the money of investing in contractors over and over again.

Multipurpose

The functionalities of a tile saw are not only limited to cutting tiles. You can also use a tile saw to cut materials like marble, granite, stone etc., efficiently. Many people also use a tile saw to cut hard foods like peanut brittles etc. The functionalities of a tile saw don't just end here because you can also use it to cut wood, glass, and much more. Of course, you will need special blades for each purpose.

What are the Different Types of Tile Saws?

There are a variety of types of tile saws. These variations are essential because of user demand. If you want to cut through a variety of materials, then you will need a different tile saw. To choose the best tile saw, you don't just need to know the types of tile saw so that you can choose the one that is the best fit for your needs.

Table Top Wet Tile Saw

The most commonly used and widely preferred tile saw is the tabletop wet tile saw. As the name gives a hint, this tile saw has a water operation system to cool the blades. It is a very thoughtful and vital feature of a tile saw because the blades can get damaged by overheating. Furthermore, the blades are coated with diamond powder to enhance their performance.

As a tabletop saw, it comes with a stand on which you can push the material to cut through the diamond cutting wheels. These diamond cutting wheels are positioned just under the table, and as it cuts through the material, water is drenched onto it. The water helps in cooling the blades and prevents dust particles from entering and damaging the blades.

Handheld Wet Tile Saw

It is another type of wet tile saw, which also uses water to cool the blades and is diamond powder-coated. The thing that distinguishes the handheld tile saw from the tabletop tile is that the former is smaller in size and can be used as a portable device. It also does not need a standing table, and you can remove the water hose if you want to use the saw for dry cutting. However, it is best if you don't disable the water hose because many dust particles can enter the saw.

Overhead Motor Wet Tile Saw

Here is another wet tile saw that has a stand and a rail system. The material on the table goes through the cutting wheel, which is positioned on top of the table. As it is on the top, users get a better vie w of the cutting angles and make accurate ripping. You will need to have a little extra budget to buy overhead tile saws as they are expensive and heavy-duty. However, it is worth buying if you are looking for consistency and accuracy.

Rail or Snap Cutter Tile Saw

A rail or snap cutter tile saw is more like a cutter than a saw. It is a handheld, manual saw that does not run with electricity, a water pump, or a table stand. It is simple to work with it as it scores and then snaps the tile. All you need to do is place the tile on a cutting surface and then drag the blade across it. If you are looking for the most inexpensive tile saw, then you can opt for this type.

Tile Saw FAQ's

Q: What should you look at before buying a tile saw?
A: While buying the best tile saw, the blades are the most important thing to look for. You should make sure that your tile saw blades don't leave any sharp edges. The best type of blade that you can get is the powdered diam ond blade.

Q: Is a tile saw better than a cutting saw?
A: If you are looking for efficiency, then a tile saw is better than a cutting saw. A tile cutter might take a little extra time than cutting a saw, but it ensures the best results and requires fewer skills. For a cutting saw, you need to have more skills, but it will need less time.

Q: What should be the size of the tile saw?
A: If you are not buying a tile saw for the industrial or commercial level, it will be inefficient to buy a gigantic tile saw. The size of the tile saw depends on your needs, and for domestic and small projects, you can buy an appropriate size.

bestcovery team.jpg
Our research team searches out the best of everything so that you can confidently pick the perfect products and services for your needs.
Related Content
Go to top