The L.A. ‘granny flat’ built for climate change: Take a look at the eco-chic inside

An exterior shot of a quaint 'granny flat' with redwood siding and a wraparound deck
Repurposed materials were used to build this accessory dwelling unit, or granny flat, in Highland Park.
(Cris Nolasco)

Most people would have sent the wood to a landfill. But for sustainable builder Steve Pallrand, founder and principal designer of the L.A. firm Carbon Shack Design, the dilapidated barn’s redwood siding was the impetus for what came next: an 888-square-foot zero energy accessory dwelling unit, or ADU.

“I’m inspired by the idea of living in harmony with nature,” says Pallrand, who finished the ADU last year after dismantling the barn and incorporating its salvaged materials in the one-bedroom home that now stands in its place.

In a world that is slowly coming to grips with climate change, Pallrand’s eco-friendly approach to construction appealed to the homeowners, a television writer and a musician, who wanted a sustainable and modern addition where they could accommodate friends and family and their aging parents in particular.


Architect professor Alexis Navarro designed and built an accessory dwelling unit that is affordable and attractive. The result is inspiring.

March 18, 2021

They also wanted a home that would complement their Highland Park neighborhood, which is one of the oldest communities in Los Angeles and home to some of Southern California’s most classic architectural styles, such as Craftsman, Queen Anne Victorian, Mission and Tudor Revival.

More than a century old, the couple’s four-bedroom Craftsman may have featured modern updates like the swimming pool next to the house, but the unpermitted barn at the back of the 10,000-square-foot double lot was pure vintage — perfect for a builder like Pallrand whose home in Mount Washington is made of salvaged material.

But Pallrand didn’t stop there. To make sure the systems he puts into place tread lightly on the planet, Pallrand added many eco-friendly solutions: Wood from the dilapidated barn was saved to frame the interior non-structural walls of the ADU. The barn’s redwood siding was reused on half of the house and new redwood siding was added to finish the rest of the exterior. Old roof sheeting was reused as flooring. Board-and-batten barn siding was used to make the cabinets and millwork. The concrete slab was broken up and used as pathways, and when the city forced them to remove a cedar tree for fire access, they used it to create live edge countertops and furnishings in the kitchen.

The living, dining room and kitchen of an ADU features wood floors, ceiling and cabinets.
The dilapidated barn of this Highland Park property provided ample salvaged wood for the flooring, custom cabinetry and wood-clad ceiling.
(Cris Nolasco)

“Building for me is emotional,” he adds. “It’s possible to enjoy the beauty of nature without destroying it. We always try to do things in a greener way.”


Pallrand’s design is one of the latest entries in L.A.’s ADU offerings, also known as granny flats, that have grown in popularity as a way to address L.A.’s housing crisis. While the city has loosened the reins for those wanting to build additional dwellings on their property and has implemented a simplified program known as the ADU Standard Plan Program, Pallrand takes it a step further by showing that ADUs can add value and beauty while consuming less energy.

Taking his cues from the homeowners, Pallrand designed an ADU that references the main Craftsman house in front by adding rustic redwood siding to the ADU as well as a flat shed roof that slopes to the south to maximize solar panels and a slightly elevated wraparound covered porch that connects the home to the backyard.

Wood cabinets, ceiling, floor and window trim in a kitchen/dining room
Home Front Build milled and custom-crafted the live-edge countertops, dining table and cantilevered shelves of this Highland Park granny flat from a mature cedar tree removed from a nearby property.
(Cris Nolasco)

Pallrand, who studied at CalArts and is influenced by the land art movement of the 1970s says the house may be Craftsman in nature but its spirit is distinctly modern.

“It’s trying to be a part of the history of the site but it’s clearly new,” Pallrand says. “The old wood has age and authenticity to it. That’s what we love about historic structures; they are part of the community.”

Inside, exposed timber, beams and colorful Revival tile from Mission Tile West in the kitchen and bathroom continue the Craftsman theme while high-performance thermal sliding door panels at the southwest corner of the unit connect the addition to the backyard and pool — a classic Modernist move.

A Craftsman-inspired house in Elysian Heights gets a whimsical expansion: A writing studio with a hidden rooftop deck that offers views of downtown Los Angeles.

July 30, 2021


Beefed-up insulation and dual-pane windows, framed with reclaimed lumber from other salvaged jobs, reduce noise and energy usage. And clerestory windows flood the interiors with daylight and expand the views out while maintaining privacy.

For further energy efficiency, Pallrand installed electrical appliances with an energy star rating, including an induction cooktop paired with a combination microwave and convection oven.

In some ways, the eco-friendly design represents an optimistic vision for the future of a state plagued by wildfires, drought, heat waves and limited housing. It also serves as inspiration for people who want to build additional units for working from home and aging in place.

High-performance thermal sliding doors at the southwest corner of the Highland Park ADU
High-performance thermal sliding doors at the southwest corner of the Highland Park ADU retract fully, to dissolve the divide between inside and outside.
(Cris Nolasco)

“People who were stuck in their homes during the coronavirus pandemic are now thinking about how they want to live,” Pallrand says. “They don’t want to Zoom in their dining rooms. They want a place to work; they want separation. They also want a place for guests and family. A lot of our clients are thinking about caregivers for kids and aging family members. They want them on-site but not in the house.”

As Los Angeles grows denser and California records its hottest summer on record, the Highland Park ADU stands as an example of what’s possible: new housing in an increasingly crowded city that is energy efficient.

According to Pallrand, there are two ways to reduce the environmental footprint of a house. “You can reduce your operational carbon footprint, the carbon cost of living in your house,” when it comes to choosing options for heating, cooling, cooking and cleaning clothes. And if you are building new, doing an addition or remodeling, you can reduce your embodied footprint — the carbon footprint of building materials such as concrete, lumber and roofing — by evaluating your one-time carbon cost. (Want to know what your carbon footprint is? Pallrand’s website,, offers several calculators as well as efficiency facts and a step-by-step guide to building green).


Pallrand details his strategies for creating environmentally friendly housing that will help fight climate change:


1. Plug it in

The best way to reduce your operational footprint is to have an all-electric house. This project has a solar array on the roof, but even if you can’t produce your own electricity, getting rid of gas appliances still makes environmental sense as most utility grids are getting greener, phasing out coal and relying more on wind, solar and other renewable sources.

View through sliding door panels of the backyard and pool
High-performance thermal sliding doors open to the backyard and pool.
(Cris Nolasco)


2. Creative cooling

At least half of the energy used in a house goes to heating and cooling. In this project, we used heat pumps that heat and cool with electricity only. Air-conditioning is already done by electricity but heat pumps heat with electricity as well. Basically, it is an AC unit running backward. Heat pumps are more efficient since they rely on heat exchange and so are more cost-effective.


3. In hot water

Heating your water is another major source of energy use in a house, accounting for approximately another 20% of usage. We have been taught that getting rid of the old gas-tank hot water heater and replacing it with a gas tankless is a more efficient use of energy. This is true, but you are still left with the fact that gas is a non-renewable resource. Heat-pump hot water heaters are electric units that use heat-exchange technology to heat water much more efficiently. They are more expensive than a traditional gas-tank hot water heater, but switching to a heat pump hot water heater will easily pay for itself within years and most certainly over the life of the unit and, most important, it is another way to easily get to an all-electric house.

Eco-sensitive designers and builders have long used salvaged lumber or recycled fixtures.

May 24, 2019


4. All-electric kitchen

Why is a kitchen so hot when you’re cooking? It’s because only about 30% of the energy produced by burning gas is used to cook. The rest goes to heating your air, making life miserable and a complete waste of a non-renewable resource. Induction cooktops use electromagnetic energy delivering 80% to 90% to the cooking vessel. They are more efficient, make for a cooler kitchen, and has anyone thought about the environmental costs of living in a small refinery? One of the largest sources of indoor air pollution is the inefficient burning of fossil fuels in your kitchen.



5. Harness the sun

The roof on this project was tilted slightly to the south and is a single flat plane to maximize the number of solar panels. Enough panels were installed to reduce the operational energy footprint of this all-electric house to zero, but with so many panels the ADU became a net energy producer, offsetting the energy use of the main house as well as the pool equipment.

A bathroom with green tile and wood cabinets
The bathroom features no-touch hand washing, a one-gallon flush toilet, and a low-flow rain showerhead.
(Cris Nolasco)


6. Water efficiency indoors ...

We pay a water bill but we rarely think about how costly water is environmentally. Transporting it, refining it and treating the sewage takes a lot of energy. Reducing water use is not just critical as our water supply in Southern California shrinks but also because of the massive amount of energy it takes to get water over mountains and across huge distances to our taps.

Low-water appliances and plumbing fixtures are readily available and not like they were when first introduced. Government agencies require low-use fixtures for commercial buildings, and manufacturers are eager to make those products more pleasing and acceptable to the residential market as well. Low-flow showerheads and single-gallon flush toilets are much, much more efficient and pleasant to use than they used to be.

We also used motion-control water faucets in the bathroom [which conserve water by automatically shutting off when not in active use]. Washing your face and hands or brushing your teeth while leaving the water running wastes an astounding 4 gallons each time.

The main complaint regarding these fixtures is not knowing where the sweet spot is to trigger water flow. This is because our primary experience is in commercial situations where each building has a different faucet manufacturer. When it is your faucet that you use every day, you quickly know exactly how to use it. We do not use them in kitchens as trying to find that sweet spot when washing a head of lettuce is impossible. Instead, we install touch-on-off faucets in kitchens to reduce water use and which are wonderfully convenient when you are cleaning meat or fish and don’t want to touch the tap.

A pitcher and two glasses sit on a raised table in a kitchen.
The kitchen in the ADU designed by Home Front Build features all-electric appliances.
(Cris Nolasco)



7. ... and outdoors

We installed California native drought-tolerant landscaping along with a drip irrigation system that responds automatically to weather changes and detects and shuts off or alerts the owner when there is a leak. We also added rain capture cisterns to the downspouts to reuse rainwater for the landscaping.


8. Start with the foundation

Concrete is responsible for large amounts of carbon emissions (the production of cement is the carbon-intensive part), so the house was designed to sit above the ground rather than down at grade. This is because the ground rises toward the back of the site and in order for the structure to be at grade a concrete intensive slab and retaining wall would have had to be poured. Instead, we elevated the house above the grade, allowing us to use less concrete. We used a perimeter foundation, point loads and a raised wooden floor. To create the desired link to the exterior we used the wraparound deck and an “invisible” corner, two sliding glass doors meeting at and opening up the corner.

Flowers in a vase are on a table situated in front of a book shelf.
The live edge dining room table was built from a fallen cedar tree in Highland Park.
(Cris Nolasco)


9. Salvage materials

The new building occupies the spot where an original 110-year-old dilapidated barn once stood. We took the old structure apart but, instead of throwing it in the dumpster, we found ways to reuse most of the materials, thereby reducing the need for as much new material and reducing the overall carbon footprint of the structure.

Bread sits on a cutting board on the counter.
The live edge countertops in the kitchen came from a fallen cedar tree.
(Cris Nolasco)


10. Shop local

No house can be completely built from recycled materials. New materials, like tile, always have to be purchased, so our mantra is to shop local. The carbon cost of shipping consumer products around the globe on polluting container ships is a major source of unregulated greenhouse gases. Chances are if you buy products made in the States they will have been produced under local environmental regulations and most certainly took less energy to bring to your house. Purchasing tile, plumbing fixtures, appliances and other finishes locally or nationally supports local businesses.


A Craftsman-inspired house in Elysian Heights gets a whimsical expansion: A writing studio with a hidden rooftop deck that offers views of downtown Los Angeles.

July 30, 2021


11. Over-insulate

So cheap and so effective. There are states in the United States that do not require any insulation. Insulation is so cheap; all you have to do is remember to over-insulate. However, no wall or ceiling is completely insulated. The framing studs interrupt the insulation envelope, allowing thermal transfer to bridge between the interior and the exterior. To break this thermal bridging, we installed environmentally friendly rigid insulation to the outside of the framing. This is an added upfront cost but more than pays itself back over time with energy savings.


12. Skip the paint

To improve indoor air quality and get rid of more manufactured materials, we use natural plaster finishes on the interior. This is actually cost-effective since it reduces the need for painting.


13. Add a light touch

We use LED fixtures exclusively since they use 80% less energy than incandescent bulbs, and last much longer. The use of LED lights is a revolution in home energy reduction. The variety of LED light fixtures has rapidly expanded, and they are infinitely more pleasing than fluorescent lighting.


14. Forget perfection

Thinking about and reducing the carbon footprint of the materials used in your house is easier than one thinks, and in many cases, more cost-effective. In our firm we don’t strive to be perfect or shame clients into doing more than they want or can afford. There is a reason why in Los Angeles there are only a handful of LEED or Passive House residences. LEED status comes at a price. You have to hire an outside LEED consultant that adds tens of thousands [of dollars] to the job. Most homeowners don’t want to spend the money for a label, and we feel if you can only get halfway toward being perfect that is better than nothing. Similarly, Passive House is a wonderful and admirable goal but is prescriptive, and if you don’t do everything, you don’t get the label. We strive not to be orthodox and reject clients just because they cannot achieve LEED platinum. We use the goals and techniques of LEED, Passive and other approaches to fit the budget and level of interest with our clients. Perfection is often unattainable. We offer solutions to our clients and help them go as far as they can.


ADUs, also known as granny flats, are poised to transform neighborhoods across Los Angeles and beyond, as cities look to the compact dwellings as a way to ease the region’s severe housing shortage.

March 17, 2021